Regresar a la: Cables de seguridad

(N)HXCH FE180 E30-E60

halogen-free, with improved fire characteristics,
with reference to VDE 0266 and CENELEC HD 604 S1,
circuit integrity (FE180) in accordance with VDE 0472-814, IEC 60331,
System Circuit Integrity E30-E60* in accordance with DIN 4102-12

1 Conductor: solid/stranded
2 Fire barrier: high-peformance Keram compound
3 Insulation: cross-linked polymer, zero halogen
4 Filler: flame retardant, zero halogen
5 Concentric conductor: bare copper wire
6 Reinforcing helix: bare copper tape
7 Separator: plastic tape
8 Sheath: FRNC/LSZH

Descripción

Cables with intrinsic fire resistance are installed in all areas that require special protection of people and equipment against fire and fire damages and where strict security requirements must be fulfilled. Suitable for indoor applications. For outdoor applications, protection must be provided against exposure to direct sunlight. The cable should only be laid directly in earth or water if a protective conduit is used. These cables correspond to the demands of System Circuit Integrity E30-E60* in accordance with DIN 4102-12. System Circuit Integrity is guaranteed at an operating voltage up to 400V.
Permitted operating temperature at conductor of +90˚C.

  • Color de la funda exterior anaranjado
  • Material exterior de la vaina Flame retardant Polyolefin compound, CENELEC HD 604 S1 and VDE 0276-604 "HM4"
  • Conductor concéntrico Bare copper wires with reinforced helix
  • Conductor Cobre desnudo, sólido o trenzado, IEC 60228 y EN 60228 (VDE 0295)
  • Colores principales CENELEC HD 308 S2, VDE 0293
  • Relleno Compuesto termoplástico retardante de la llama, libre de halógenos
  • Aislamiento Aislamiento doble, reticulado, compuesto especial de Keram de alto rendimiento, VDE 0266 "HXI1"
  • Cero halógeno gases no corrosivos IEC 60754-1/-2, EN 60754-1/-2, VDE 0482-754-1/-2, AREI-RGIE Art.104-SA
  • Propagación de llamas IEC 60332-1-2, EN 60332-1-2, VDE 0482-332-1-2, AREI-RGIE Art.104-F1
  • Dispersión de llamas IEC 60332-3-22/-24 Cat. A/C, EN 60332-3-22/-24 Cat. A/C, VDE 0482-332-3-22/-24 Cat. A/C, AREI-RGIE Art.104-F2
  • Densidad de humo IEC 61034-1/-2, EN 61034-1/-2, VDE 0482-1034-1/-2, AREI-RGIE Art.104-SD
  • Integridad del Sistema de Circuito DIN 4102-12, AREI-RGIE Art.104-FR2
  • Integridad de circuito (FE180) IEC 60331-11/-21 (180 minutes), VDE 0472-814 (FE180), BS 6387 C/W/Z, IEC 60331-1 (120 minutes), IEC 60331-2 (120 minutes), EN 50200 (PH120 minutes), VDE 0482-200 (PH120), VDE 0482-362, AREI-RGIE Art.104-FR1
  • System Circuit Integrity is dependent on installation method.
  • Tensión de prueba a 50 Hz 4000 V
  • Temperatura de instalación -5 °C - +50 °C
  • Temperatura de funcionamiento -45 °C - +90 °C
  • Integridad de circuito E30-E60*
  • Integridad del aislamiento FE 180
  • Mínimo de flexión durante la instalación (multinúcleo) 12 x D
  • Plegado mínimo durante la instalación (núcleo único) 15 x D
  • Radio de flexión mínimo permanente (multinúcleo) 12 x D
  • Radio de flexión mínimo permanente (núcleo único) 15 x D
  • Screened No

Documentos

ENDENLFRCNESIT
Certificado MPA file-icon Certificado MPA file-icon file-icon file-icon file-icon file-icon
DAT_VDEApproval_OBJ DAT_VDEApproval_OBJ file-icon file-icon file-icon file-icon file-icon file-icon
Ficha técnica Ficha técnica Ficha técnica Ficha técnica Ficha técnica file-icon Ficha técnica Ficha técnica

Versiones

N° de artículoInventarioProductoNúmero de núcleosDiámetro [mm2]Diámetro exterior de la vaina [mm]Prop. CU [kg/km]Peso [kg/km]Carga de fuego [kWh/m]ConductorConstrucción
186943 (N)HXCH FE180 E30-E60 2 x 1.5/1.521.5/1.512.7522220.60 kWh/mde corridoLN
186944 (N)HXCH FE180 E30-E60 2 x 2.5/2.522.5/2.513.5802720.66 kWh/mde corridoLN
187232 (N)HXCH FE180 E30-E60 2 x 4/424/414.91233530.78 kWh/mde corridoLN
187234 (N)HXCH FE180 E30-E60 2 x 6/626/6161824310.86 kWh/mde corridoLN
186945 (N)HXCH FE180 E30-E60 3 x 1.5/1.531.5/1.513.2662460.65 kWh/mde corrido3L
186946 (N)HXCH FE180 E30-E60 3 x 2.5/2.532.5/2.514.11043060.72 kWh/mde corrido3L
187238 (N)HXCH FE180 E30-E60 3 x 16/16316/1621.3624.710281.63 kWh/mtrenzado3L
187239 (N)HXCH FE180 E30-E60 3 x 25/16325/162590214351.90 kWh/mtrenzado3L
187240 (N)HXCH FE180 E30-E60 3 x 35/16335/1637.3119018042.20 kWh/mtrenzado3L
187241 (N)HXCH FE180 E30-E60 3 x 50/25350/2531.7172324542.84 kWh/mtrenzado3L
187242 (N)HXCH FE180 E30-E60 3 x 70/35370/3536241033513.52 kWh/mtrenzado3L
186985 (N)HXCH FE180 E30-E60 3 x 95/50395/5041.1329644584.50 kWh/mtrenzado3L
186986 (N)HXCH FE180 E30-E60 3 x 120/703120/7044.5423655385.30 kWh/mtrenzado3L
186987 (N)HXCH FE180 E30-E60 3 x 150/703150/7049.2510067486.00 kWh/mtrenzado3L
186988 (N)HXCH FE180 E30-E60 3 x 240/1203240/12061.58242109379.93 kWh/mtrenzado3L
186947 (N)HXCH FE180 E30-E60 4 x 1.5/1.541.5/1.514.1812810.73 kWh/mde corrido3LN
186948 (N)HXCH FE180 E30-E60 4 x 2.5/2.542.5/2.515.11283520.82 kWh/mde corrido3LN
186949 (N)HXCH FE180 E30-E60 4 x 4/444/416.72004670.96 kWh/mde corrido3LN
186950 (N)HXCH FE180 E30-E60 4 x 6/646/618.12976161.13 kWh/mde corrido3LN
186951 (N)HXCH FE180 E30-E60 4 x 10/10410/1020.15048631.33 kWh/mde corrido3LN
186989 (N)HXCH FE180 E30-E60 4 x 16/16416/1623.479612531.70 kWh/mtrenzado3LN
186990 (N)HXCH FE180 E30-E60 4 x 25/16425/1627.2114217522.20 kWh/mtrenzado3LN
186991 (N)HXCH FE180 E30-E60 4 x 35/16435/1629.8152622182.56 kWh/mtrenzado3LN
186992 (N)HXCH FE180 E30-E60 4 x 50/25450/2534.8220330503.41 kWh/mtrenzado3LN
186993 (N)HXCH FE180 E30-E60 4 x 70/35470/3539.5308241384.18 kWh/mtrenzado3LN
186994 (N)HXCH FE180 E30-E60 4 x 95/50495/5045.2420855165.58 kWh/mtrenzado3LN
186995 (N)HXCH FE180 E30-E60 4 x 120/704120/7049.1538868796.37 kWh/mtrenzado3LN
186996 (N)HXCH FE180 E30-E60 4 x 150/704150/7054.3654084187.83 kWh/mtrenzado3LN
186997 (N)HXCH FE180 E30-E60 4 x 185/954185/9559.88159104939.55 kWh/mtrenzado3LN
186998 (N)HXCH FE180 E30-E60 4 x 240/1204240/12067.9105461362912.00 kWh/mtrenzado3LN
187244 (N)HXCH FE180 E30-E60 7 x 1.5/2.571.5/2.516.11333910.94 kWh/mde corrido7L
187245 (N)HXCH FE180 E30-E60 30 x 1.5/6301.5/628.449912392.67 kWh/mde corrido30L